Goboservice GOLED, Инструкция по эксплуатации, Страница: 13 / 17

GOLED
- 13 -
E
N
G
L
IS
H
6. POSSIBLE PROBLEMS-CAUSES AND SOLUTIONS
PROBLEMS POSSIBLE CAUSES CHECKS AND SOLUTIONS
The projector does not turn on No power Check if the power supply is ON
Reduced brightness LED exhaustion, dirty optical elements
Accurate clearing of the optical unit ot
contact Customer Service
The line circuit breaker shuts off when the
projector is turned-on
The circuit breaker is undersized compared to
the projector electrical features
Bypass or replace the circuit breaker
Defective projection
Gobo or lamp reflector breaking,
deposit of dust or dirt
Consult technical support
Gobo cleaning
If the problem differs from the above-mentioned cases, contact technical support.
7. DIRECTIVES
The products to which this manual refers are in compliance with the European
Community Directive:
-
2014/35/EU LVD - Safety of electricalequipmentsuppliedatlowvoltage
-
2014/30/EU EMC - Electromagnetic Compatibility
-
2011/65/EU ROHS - Restriction of the use of certainhazardoussubstances
-
2009/125/EC ERP - EcoDesignrequirements for Energy-relatedProducts
The projector is manufactured according to the UE directives. Evidence of this is the affixed CE mark on
the product and the declaration of conformity.
8. DISPOSAL
The projector must be disposed of in compliance with the applicable laws relating to
lighting products. In any case should not be put in normal waste or litter the
environment; this action even if prosecuted is a serious threat to animals and people
and a source of pollution in the long term. The product may not be treated as a
simple urban waste and must be disposed of properly according to the regulations
concerning the differentiated waste disposal.