Goboservice GOLED, Инструкция по эксплуатации, Страница: 6 / 17

GOLED
- 6 -
WWW.GOBOSERVICE.COM
or other liquids may damage the product. The projector must be kept
away from wet surfaces. ATTENTION: water must not touch the
projector when it is connected to the mains supply.
9. MAINTENANCE - Before starting any maintenance work or cleaning of
the projector, cut off power from the mains supply.
10. RISK OF VIEW - Never look directly or with optical instruments at the light
beam of the projector.
11. RESIDUAL RISKS – Even if the product is built in compliance with all rules
and precautions, residual risks related to certain structural aspects of
product usage remain. Do not disassemble the device. Maintenance
should be performed by trained personnel. Do not tamper for any reason
the ballast which is sealed for safety reasons and should remain so. If
ballast is tampered this represents a serious danger and in this status the
product is no more under warranty. Set the unit in visible areas and pay
attention that does not interfere with normal passage of people, the risk of
a collision must be minimized if not eliminated. Do not place the unit in
positions where it can fall hitting people or animals. Keep children away
from the unit when it is working and it is still connected to the mains
supply. In case of abnormalities in the coating or breakage of the housing
that contains bright spare parts, do not turn on the projector and stop the
use of the product. Do not install in areas available to minors or persons
who could be affected by the use or misuse. The device if it is not
connected to mains supply it is not a danger for people and animals even
when exposed to rain. The projector works with electrical energy at low
voltage and that puts it in an area of dangerousness typical of a
household appliance; it must be considered, in any case, a lighting
apparatus and, therefore, must be adopted during use an appropriate
attitude. The device is designed and constructed using all safety
criteria and suitable materials to prevent hazards and to minimize
risks.