Power controls
These are simple rocker switches.
On
Off
In order to switch the motor on\off press
the switch on the switch on the left marked
. Ensure that the switch on the right
marked
is in the off position (usage of this
switch will be described under the
‘shampooing’ section).
Cartridge filter
Your cleaner features a removable heavy
duty cartridge filter, designed to filter both
large debris and fine dust. The cartridge filter
will be one of 2 types and will already have
been fitted in place under the motor housing
E1
. Type 1 is simply pushed firmly into
place. Type 2 is a looser fit and has a locking
nut to hold the cartridge filter in place -
simply position the filter and twist the locking
nut clockwise.
Dry usage
IMPORTANT: The cartridge filter must
always
be fitted when not picking up liquids.
Failure to do so may cause damage by
allowing dust and larger particles into the
motor (and invalidation of the guarantee).
To clean the filter, remove it and brush
the grooves with a soft brush, ensuring you
don’t damage the surface. Proper
maintenance will give it a much extended
life.
Wet usage
When picking up liquids, the foam filter
should be used. Remove the cartridge filter
from underneath the motor housing. The
foam filter should be pushed up against the
base of the motor housing and secured by
use of the foam filter locking plate. The
locking plate is inserted beneath the foam
filter and rotated clockwise until it locks into
position
E2
. Refit the motor housing.
IMPORTANT: Always switch off and
unplug from wall socket before removing or
replacing the filters.
7
7832 3-in-1 ib 11/07/2003 14:26 Page 7
