Storage
Prior to storage the following steps
should be taken:
1
Empty the bucket and reassemble as
described under ‘Emptying’.
2
Remove the shampoo nozzle and, using
the end of the extension tube, suck up
some clean water so that the inside of
the tubes and hose are cleaned.
3
Empty the bucket once more and wipe
clean.
4
Remove the foam filter and rinse under a
tap. Either refit the foam filter or, if the
cleaner is to be used next for dry pick up,
refit the cartridge filter.
5
Empty any solution remaining in the clean
water tank. This may then either be re-
fitted into the tool storage cart, or stored
elsewhere so that tools may be stored in
the cart.
6
Before removing the trigger, clips and
shampoo tube, squeeze the trigger to
allow any pressurised cleaning solution
remaining in the shampoo tube to
escape. If not, when the tube connector
is removed from the shampoo jet,
cleaning solution may squirt out.
How to get the
best from your
shampoo system
• Always use AquaVac or Goblin cleaning
solution. This contains the right amount
of cleaner and defoamer.
• Only fill the clean water tank as directed.
• Do not over wet the area being cleaned. If
this occurs pass over with suction only.
• Do not walk on carpets or replace
furniture until fully dry.
• Clean out the tanks, bucket, hose and
extension tubes after use.
• Do not leave solution inside the tank
when not in use.
• Never use a cleaning solution without a
defoaming agent included.
• The transparent shampoo nozzle can be
cleaned by removing the four screws so
that it can be taken apart. Wipe with a
damp cloth. When re-assembling, ensure
the screws are firmly tightened.
• If water and cleaning solution fails to
come out of the shampoo nozzle when
the trigger is operated, check the
following:
- is the pump switched on?
- is the clean water tank empty?
- is the feed pipe connected to the water
inlet?
- is the tube connector attached to the
shampoo jet?
- is the shampoo tube connected to the
shampoo nozzle?
Helpline
If you have any difficulty with your
appliance, do not hesitate to call us. We’re
more likely able to help than the store from
where you bought it.
Please have the following information
ready to enable our staff to deal with your
query quickly:
•
Name of the product
•
Model number as shown on the
underside of the appliance.
14
7832 3-in-1 ib 11/07/2003 14:26 Page 14
