BlueSense
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 16 / 55
www.go-sys.de
5.1 Sensors
Setup Menu
From this menu you can set the parameters of the connected sensors.
The specific parameter setup is described in the sensor description.
The number of sensors that can be connected is determined by the delivered Transducer configuration. There
are two configurations:
•
1 Control parameter
One (1) sensor is connected. One control parameter is measured and where applicable the tem-
perature as an associated parameter.
•
2 Control parameters
Two (2) sensors are connected. Two control parameters are measured and where applicable the
temperature for each sensor as associated parameters.
To determine if your transducer has one (1) or two (2) control parameters please refer to your shipping re-
ceipt.
The example has:
•
1. Sensor: Oxygen sensor (first control parameter)
•
2. Sensor: Oxygen sensor’s integrated Temperature sensor (associated parameter)
•
3. Sensor: pH sensor (second control parameter)
Switch to menu of the first sensor, in this case oxygen, § 6.1.1.
Switch to menu of the second sensor, in this case temperature, § 6.1.2.
Switch to the menu of the third sensor, in this case pH.
Switch to the information about the state of the digital inputs, § 6.1.3.
Switch back to the Setup menu.
Switch to the Parameter Display.
