6
REV.01
INSTALLATION INSTRUCTIONS
© 2016 Go Rhino Products. All rights reserved
Vehicles equipped with factory tow hooks:
Step-1 From underneath the vehicle, remove (1) nut and (2) bolts securing the driver side tow hook to
the frame rail using an 18mm socket and 18mm wrench, (Fig 1 & 2).
Step-2 Remove the tow hook by pulling the tow hook out of the frame from the front of the bumper,
then remove the foam tow hook access cover from behind the bumper. Note: the foam access cover will
not be reinstalled.
Fig 1
Remove nut and bolts
securing the driver side
tow hook to the frame.
Fig 2
Foam Access Cover
Driver Side Shown
Driver Side Shown
