5
REV.01
INSTALLATION INSTRUCTIONS
© 2016 Go Rhino Products. All rights reserved
S
tep-1 Position the grille guard side plates with the front edge down and the top and bottom step tube
between the side plates.
Step-2 Attach the top tube to the side plates using (2) 3/8” X 1 1/4” hex bolts and (2) 3/8” lock washers. Do not
tighten.
Step-3 Attach the step tube to the side plates using (4) 3/8” X 1 1/4” button head bolts and (4) 3/8” lock washers.
Do not tighten.
Step-4 Position the center plate between the grille guard side plates, with the slotted mounting holes in the
center plate down. Attach the center plate to the side plates using (4) 3/8” X 1 1/4” button head bolts, (4) 3/8”
flat washers, (4) 3/8” lock washers and (4) 3/8” hex nuts. Do not tighten.
Step-5 Position the driver side brush guard up to the grille guard assembly. Loosely attach the bottom of the
brush guard to the grille guard side plate using (1) 3/8” X 1 ¼” hex bolt and (1) 3/8” lock washer . Attach the
top of the brush guard to the side plate using (2) 5/16” X 1” button head bolts, (2) 5/16” flat washers and (2)
5/16” lock nuts. Do not tighten. Repeat for the passenger side brush guard.
Step-6 Attach the driver side headlight protector to the brush guard using (1) ¼” x ¾” button head bolt, and the
opposite end to the side plate using (2) 5/16” x 1” button head bolts, (2) 5/16” flat washers and (2) 5/16” lock
nuts. Repeat for the passenger side headlight protector. Align the grille and brush guard assembly, and tighten all
nuts and bolts.
B
A
B
1
B
C-D
C-D
C-D
G-E
G-F
H-G-I
F
G-E
2
3
4
8
6
