Original Instruction GB
5
c) Avoid using the machine in bad weather conditions especially when
there is a risk of lightning.
d) Use the machine only in daylight or good artificial light.
e) Never operate the machine with defective guards or shields or without
guards or shields in place, or if the cord is damaged or worn.
f) Switch on the motor only when the hands and feet are away from the
cutting means.
g) Always disconnect the machine from the power supply (i.e. remove the
plug from the mains or remove the disabling device or removable
battery)
Whenever
the
machine
is left unattended,
before clearing a blockage;
before checking, cleaning or working on the machine;
after striking a foreign object to inspect the machine for damage;
whenever the machine starts vibrating abnormally, for
immediately check.
h) Take care against injury to feet and hands from the cutting means
i) Always ensure that ventilation openings are kept clear of debris.
j) Take care against injury from any device fitted for trimming the
filament line length. After extending new cutter line always return the
machine to its normal operating position before switching on.
k) Never fit metal cutting elements.
l) Never use replacement parts or accessories not provided or
recommended by the manufacturer.
m)
Warning. Cutting elements continue to rotate after the motor is
switched off.
n) Keep extension cords away from cutting elements.
o) Use only extension cables authorized for outside work and protected
from splashes. The extension cable must have conductors of at least 1,
5 mm² for a cable length less than 25 m and 2,5 mm² if the length
exceeds 25 m. Before use, always completely unroll the cable. Check
that the cable is in good condition.
p) In case of accident or breakdown immediately stop the machine
q) Do not overreach and keep the balance at all times, always be sure of
the footing on slopes and to walk, never run;
r) Do not touch moving hazardous parts before the machine is
disconnected from the mains and the moving hazardous parts have
come to a complete stop.
s) In case of abnormal vibrations, Switch the machine off immediately,
and check it for damages, if necessary, have it repaired by a qualified
