Go-Float 2012 FUSION, Руководство пользователя

Страница: 13 / 16

Changing the Propeller
Before doing anything with the propeller, ensure the cables to the
battery are disconnected.
Detaching the propeller it is a simple matter of unscrewing and remov-
ing the locknut using the special tool supplied. When doing this, take
hold of the propeller to stop it turning. Under no circumstances should
you attempt to loosen the locknut with a hammer or similar tool as this
may damage the locknut or shaft – or both. (F)
Once the locknut is removed, you will be able to slide the propeller off.
When putting the propeller back on, verify there is a proper fi t of the
groove and shear pin otherwise the propeller will not be locked in place.
(G)
After using the motor always check and clear any weed or fishing line
that may have become tangled around the propeller. Next, give the
motor a wipe down with warm water to remove any salt or sand parti-
cles and then spray it with fresh water.