GO Elliptical LX-03, Руководство пользователя

Страница: 17 / 47

- 17 -
STEP 5 : Attach the Pedal Tube Assembly to the Main Frame
(A) Attach the front pedal covers top and bottom #104/#105 to the left pedal
(this was assembled in the prior step) tube by using 2x #122 screws and 1
x #30 screw. (See Fig.8A)
(B) Repeat the process for the right side pedal tube
(C) Locate the left Pedal tube. NOTE: the left and right pedal tubes are
different and the machine will not function if the wrong pedal tube is
assembled to the wrong side.
(D) Attach the left pedal tube to the base frame pulley axel(See Fig.8B)
(E) Secure the left pedal tube to the base frame crank arm by using 1 x #17
washer and 1 x #12 M10 lock nut. Completely tighten with a wrench
(F) Repeat the process for the right side pedal tube
(G) Insert the front left of the pedal tube #86 in to Action handle bar tube #69
and secure them together by using 2 x #18 Allen head bolts (See Fig. 8C)
Do not fully tighten these bolts. These should be tightened in step 11
(H) Repeat the process for the right side. Do not fully tighten these bolts.
#122
4
#30
2
#12
2
#17
2
#18
4
Make sure both square moving Arm ( 98,and 99) toward the down direction, if
for any reason you have rotated the Swivel tube (l /R ) to occur the 98/99 arms
one of them towards up--just turn the Swivel tube 360 degree to make both
Moving towards to same down direction.
Wrong Correct