14
DISASSEMBLY & PACKING INSTRUCTIONS
1.
Place the (optional) travel case on a raised, flat surface
such as a bed, table or luggage rack. Remove the
accessory
pouch
and place it nearby.
2.
Lock all four brakes and wheel locks.
3.
Remove the
footrest assemblies
, first collapsing them to
their shortest positions possible, then folding each at its hinge and
placing them in the zippered
accessory pouch.
4.
Remove the
push handles
from the backrest supports and
place both into the zippered
accessory pouch.
5.
Remove the through-pins securing the
armrests
, raise the
armrests
so they are parallel to the backrest and reinstall the
through-pins, locking
both
armrests
into
their vertical position.
6.
Remove the
upholstered
foam
divider
from
the
travel case and place
it on top of the seat
cushion. Failure to
do so may result in
permanent impressions being left in your
seat cushion.
7.
While standing behind the chair, remove the locking pins
from the backrest. Pull-up on and fold the backrest down over the
seat base. Re-install the locking pins to prevent the backrest from
falling open in the next step. Until the chair is broken-in, should
the backrest
fit too snugly, you may need to give it a “pop” with the
palm of your hand, beneath the backrest, at its center. The fittings
will relax with use.
8.
Turning it over, place the
rolling frame / seat assembly
(including the
upholstered foam divider
),
with its legs pointing
up, into the open travel case.
