12
14.
Remove the
push handles
from the
accessory pouch
and insert them into the openings located at the top of the
backrest. Rotate them until the spring pin buttons pop into place
through the holes provided.
15.
Remove both left and right
footrest assemblies
from the
zippered
accessory pouch
. Install them into their respective
(color-coded) openings located on the front face of the
seat
assembly
.
Holding each at a horizontal position parallel to the
front face of the frame, as shown, insert the footrest paddle fully,
then rotate it to its down position.
16.
If mounting, or remounting, the seat cushion to the
aluminum
seat assembly
, press the Velcro located on the front
face of the cushion to the front of the chair first, then lower it on to
Velcro located at the top of the aluminum seat pan, from front to
back, as you stretch the cushion toward the rear of the seat.
The seat and back cushions are constructed of high-quality
closed-cell foam thoughtfully designed and manufactured to
assure maximum comfort and protection. Ensure that you do not
place any heavy and/or pointed objects on top of them or pack
anything on top of them (such as any other part of the chair).
Because the foam is closed-cell, it will not spring back after being
compressed for extended periods of time. Any indentations in the
foam caused by such compression may become permanent. Do
not place anything sharp on top of the cushions as the vinyl
surface can puncture or tear.
17.
Assembly is complete. Return the
accessory pouch
with
the
upholstered foam divider
, to the travel case for storage.
