GNATUS Optilight Max, Руководство пользователя

Страница: 18 / 28

18
Application types: Continuous, Ramp and Pulse
• Continuous:
Maximum and continuous mode of light intensity
(same luminosity from the beginning to the end
of polymerization).
•
Maximum power
= 1200 mW/cm²
*
•
Ramp:
Gradual mode, the light intensity increases
gradually.
•
Gradual increasing =
500 - 1200 mW/cm² *
• Pulse:
Pulse modes are cycles that oscillate at a fixed
frequency.
• On/Off at each 1sec. maximum power =
1200 mW/cm²
*
* Tolerance of ± 200 mW/cm²
IMPORTANT:
- Never address the light beam to the eyes;
- Protect the visual field using the ocular protector;
- The ocular protector has the goal of filtrate only the blue light that operates in the photo
polymerization of resins for protecting the sight and still allows that the room light has a
path to the operative field.
- After using it, keep the light conductor protected by the protection cover.
Automatic shutdown:
The equipment will turn off automatically when not in use for more than 3 minutes. For turning it
on again, press the On / Off button.
OPERATION OF EQUIPMENT