GNATUS Optilight Max, Руководство пользователя

Страница: 12 / 28

12
Guidance and manufacture's declaration – electromagnetic immunity
The Optilight Color is intended for use in the electromagnetic environment specified below. The
customer or the user of Optilight Color should assure that it is used in such an environment.
Immunity test
IEC 60601
test level
C o m p l i a n c e
level
Electromagnetic environment - guidance
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
3 Vrms
150 kHz to 80 MHz
6 Vrms in ISM
ban 3 V/m
80 MHz to 2.7 GHz
385MHz
5785MHz Test
specifications for
ENCLOSURE PORT
IMMUNITY to
RF wireless
communication
equipment (Refer
to table 9 of IEC
60601-1- 2:2014)
3 Vrms
150 kHz to 80
MHz
6 Vrms in ISM
bands
3 V / m
80 MHz to
2,7 GHz
385MHz
5785MHz
Test
specifications
for
ENCLOSURE
PORT
IMMUNITY to
RF wireless
communication
equipment
(Refer to
table 9
of IEC 60601-1-
2:2014)
Portable and mobile RF communications
equipment should be used no closer to
any part of the Optilight Color, including
cables, than the recommended separation
distance calculated from the equation
applicable to the frequency of the
transmitter.
Recommended separation distance:
d = 1,2√P
d = 1,2√P 80 MHz to 800MHz
d = 2,3√P 800 MHz to 2,5MHz
whereP is the maximum output power
rating of the transmitter in watts (W)
according to the transmitter manufacturer
and d is the recommended separation
distance in meters (m).
Field strengths from fixed RF transmitters,
as determined by an electromagnetic site
survey
a
, should be less than the compliance
level in each frequency range.
b
Interference may occur in the vicinity
of equipment marked with the following
symbol:
NOTE 1 At 80MHz and 800MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
a. Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast
cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due
to fixed RF transmitters, an electromagnetic sitesurvey should be considered. If the measured field
strength in the location in which the Optilight Color is used exceeds the applicable RF compliance
level above, the Optilight Color should be observed to verify normal operation. If abnormal
performance is observed, additional measures may be necessary, such as re-orienting or relocating
the Optilight Color .
b - Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
TECHNICAL SPECIFICATIONS