TECHNICAL DETAILS OF THE GMW DEVICE
GMW J1 products are produced in Italy following high quality standards and are the
technical and structural evolution of usage of the line Jumbo C1P water filtration
system.
The GMW J1 device is studied for treating water destined to human usage, therefore
its application on already potable water is suggested.
The filtration of the J1 device happens through the C1P water filtration system
technology, a filtration process defined as macro, micro and ultra filtration, besides
an absorbing action with natural products (product tested and approved by the Ita-
lian Health Ministry, classified as “Other-Kind”).
Capacity of the filter cartridge C1P jumbo 1: up to 6500 litres - or max 12 months.
Water flux: approximately 4L/min (in direct usage tap); the flux may diminish
drastically with use (the filtration process may vary when used on water different
from the public supply water).
Use only with cold water: maximum 40°C.
Recommended pressure: 2/2.5 Bar. Not more than 3 Bar
Dimensions GMW J1: diameter 221 + closing diameter semi-blades 240
height: 6 cm
filtering cartridge diameter: 210
height cm 1,7/3,5
total device weight: 1,5 kg
Includes no return valve of flux entrance and regulation.
According to your type of installation, a no return output valve is possible to use.
ACCORDING TO THE DM 25/12 WE DECLARE THAT:
The C1P technology suitable for the reduction of undesirable substances present in
“potable” water is able to withhold tenaciously on the inside and without danger of
ceasing phenomena:
Example:
Many types of bacteria;
Mud, sand, rust, phenols, chlorine, hydrocarbons, radioactive particles, petroleum;
herbicides, pesticides, weed killers, etc.
