GMW 5203, Руководство пользователя

Страница: 52 / 71

50
13. MAGNET ACCESSORIES
13.1 5972 Magnet Control
The 5972 Magnet Control provides a convenient solution to magnet control and monitoring via a
National Instrument USB DAQ integrated into a 3U rack mountable chassis. Field control is
accomplished via the DAQs 16-bit analog output. Power and Field input connectors are provided
for a Senis field hall effect sensor. Magnet and general interlock inputs provide protection for the
magnet and personnel operating the equipment. Please refer to the 5972 Magnet Control brochure at
the end of this manual for more details.
13.2 RC-1920 - 19" Equipment Rack
To help make system installation more simple, a 19", 20U tall equipment rack is available. This
rack is fully enclosed and will accept any 19" rack mountable equipment up to 850mm [33.5"] deep.
Our rack includes the following features:
•
Interlock switch on the rear door
•
Two cooling fans mounted on the rear door
•
Key lock on the rear door
•
Provision for cable strain relief
•
Ground bonding rail
•
Omni-directional castors
•
Seismic anchoring brackets
Not included in the bare rack, but available are:
•
Blanking panels in 1U, 2U, 3U, 4U, and 5U
•
Equipment support brackets
When ordering a complete magnet system, GMW will pre-load the rack with all of the rack
mountable components. The preloaded rack will include a power strip, support brackets for all pre-
installed equipment, and blank panels to fill the unused rack space.