GMP QTOPIC-380, Руководство пользователя

Страница: 15 / 48

HOW TO USE CONTROL PANEL
E. "SPEED"(Speed Setting Button) :
To set up the laminating speed. Speed setting range is "1 ~ 10".
☞ How to set up Speed : Press "SPEED" button and adjust speed with MASTER DIAL.
NOTE : Start Speed is set with speed "3". During operation, speed can be controlled.
F. "JOB"(Job Mode Selection Button) :
Save regularly used job conditions at the memory to avoid reset the conditions in future.
Job mode is composed of 13 kinds (Poly-L~User3).
☞ Select a Job Mode : In stop status, press "JOB" button and select a required job mode for films with "MASTER DIAL".
Temp., Substrate length can be saved by operator and this value is saved automatically after 5 secs.
NOTE : Factory Setting Progress
In "Poly-L" Mode, press "TEMP" button and "STOP" button at the same time, message of "Factory Setting Progress Waiting" is blinking and displaying
for around 15 secs. After on, the setting value in JOB mode is changed to Factory Setting Values.
G. "BURST POSITION"(Set up button for the Bursting Point) :
To set up operation point of Bursting Roller. Bursting Point range is "360 ~ 530"mm.
☞ How to set up Bursting Point :
Press "BURST POSITION" button and set up its position with MASTER DIAL. The set value is saved automatically after 5 secs.
NOTE : Characteristics of materials / thickness, height of decurling bar, laminating speed make bursting point change, then,
adjust it for its cutting status. Basically, the range is 430 ~ 450.
H. "REV"(Button to Reverse Rotation of Roller) :
To rotate the roller reversely. While the "REV" button is pressed, the roller is rotated reversely in roller engaged status.
Then, the button is not pressed, reverse rotation is stopped and rollers are disengaged.
NOTE : During the machine operation, the function is not activated.
15/48