GMP QTOPIC-380, Руководство пользователя

Страница: 14 / 48

HOW TO USE CONTROL PANEL
A. "LCD"(Display)
To display the setting values in the laminator.
When the Power is ON, LCD is lighted on.
Refer to the "Explanation of Display" for each displays.
B. "MASTER DIAL"
Dial to adjust values of Roller Temp.(C), Paper Length(D), Laminating Speed(E), Job Mode(F), Bursting Point(G), etc.
☞ How to use of MASTER DIAL
1. Press a button to adjust a required value.
2. Turn "MASTER DIAL" to left / right to set up for required setting value.
Turn "MASTER DIAL" to right to increase the value and turn it to left to decrease the value.
☞ Other Functions of MASTER DIAL
1. While the "MASTER DIAL" is pressed, the current temp. is displayed.
2. Press SPEED button and MASTER DIAL at the same time, it makes COUNTER RESET.
C. "TEMP"(Button to set up the Roller Temp.) :
To set up the Roller Temp. Temp. Setting Range is "0 ~ 150"℃ .
Press "TEMP" button to "ON" and set up a required temp. with "MASTER DIAL".
The set up value is saved automatically after 5 secs.
D. "PAPER LENGTH"(Button to set up Paper Length) :
To set up the length of substrate.
Length set up range is "203 ~ 1,219"mm.
☞ How to set up Substrate Length :
Press "PAPER LENGTH" button and set up a required length with MASTER DIAL.
Setting value is saved after 5 secs. automatically.
NOTE : The overlapped paper size of cutting system is set by 3mm basicalley.
CONTROL PANEL
C
E
H
K
D
G
F
I J
A
B
L M
QTOPIC-380
14/48