background image

MAIN DEVICES

☞ Pressure Adjustment Device

Pressure on Laminating Roller & Pull Roller (for DUAL - Embossing Roller) can be adjusted by Pressure Controller and
its pressure on rollers are displayed on the gauge.
Pull the Pressure Controller to adjust the pressure. Turn it to the right to increase its pressure,
and turn it to the left to decrease the pressure. After the adjustment is done, press the controller to fix the adjustment.

NOTE : 

Different film or different substrate requires different pressure.
The recommendable max. pressure is less than 0.6MPa(6㎏/㎠).

☞ Switch to engage the Embossing Roller [

PROTOPIC III-540DUAL

]

To engage or disengage the Embossing Roller for its lamination.
Turn it to "PRESS" to engage the Embossing Roller and Embossing Laminating is started.
Turn it to "RELEASE" to disengage the Embossing Roller.

☞ EMBOSSING PATTERNS [

Optional

]

Different Patterned Embossing Roller makes various embossing effect on products.
This embossing lamination makes "added-value" effect on the products.

LAMINATION DEVICE 

Pressure 

Gauge

 

Pressure Controller

 

22/48

Содержание PROTOPIC III-540

















































Отзывы: