MAIN DEVICES
☞ How to adjust pressure on Feeder
Thickness / Surface Status of substrate requires adjustment on Feeder Stopper Shutter.
Different pressure on shutter could be a cause of twisted paper fed, miss feeding, etc. for error in feeding.
Bellows are the way for pressure adjustment.
NOTE :
After the pressure adjustment is done, process test lamination to find a suitable pressure.
☞ Feeding Lamp
To let operator know the time to put a substrate on feeder.
When the lamp is ON, put a substrate on the feeder table. Feeder makes distance of substrates automatically.
With the transparent cover, feeding status and shutter height can be checked.
"LAMP ON" :
Feeder is operated. Substrates on Feeder is fed.
"LAMP OFF" :
Feeder is stopped. Substrates are on Feeder Table for feeding.
☞ Paper Guide
To feed substrate straight and it can be adjusted for substrate width.
After the position is arranged, fix it with fixing knobs.
For exact feeding, paper alignment is important factor.
1. Remove Cover Bolts
2. Remove Cover
3. Remove Fixing Bolt
4. Adjust height of pressure adjustment bolt
24/48
Содержание PROTOPIC III-540
Страница 8: ...WARNING STICKERS Warning Stickers 8 48...