GMP 89915, Руководство по эксплуатации и техническому обслуживанию, Страница: 27 / 32

Page 27
General Machine Products
(KT), LLC
• Press and hold both and buttons.
o After 5 seconds ‘ ProG ’ will be displayed. Releasing the buttons will display ‘ no ’
• Press
o ‘ Yes ’ is displayed
• Hold and press
o ‘ InPol ’ is displayed
• Press until ‘ nPn ’ is displayed
• Hold and press
o ‘ Filter ’ is displayed
• Press until ‘ oFF ’ is displayed
• Hold and press
o ‘ InPut ’ is displayed
• Press until ‘ Cnt.dir ’ is displayed
• Hold and press
o ‘ FAc.Cnt ’ is displayed
• Press
• Enter value 00.0116 for meters, 00.0380 for feet for units with proximity switch (see image 1 for ID)
o Use to move to next digit
o Use to increment digit (this instruction applies to all following number inputs)
Hold and press
o ‘ diV.Cnt ’ is displayed
• Press
• Enter value 01.0000
• Hold and press
o ‘ dP.Cnt ’ is displayed
• Press until ‘0’ is displayed
• Hold and press
o ‘ rES.Cnt ’ is displayed
• Press until ‘ MAnrE ’ is displayed
• Hold and press
o ‘ FAc.tAc ’ is displayed
• Press
• Enter value 00.0116 for meters, 00.0380 for feet for units with proximity switch (see image 1 for ID)
• Hold and press
o ‘ diV.tAc ’ is displayed
• Press
• Enter value 01.0000
• Hold and press
o ‘ dP.tAc ’ is displayed
• Press until ‘0’ is displayed
• Hold and press
o ‘ disPm ’ is displayed
• Press until ‘ Min - 1 ’ is displayed
• Hold and press
o ‘ Wait0 ’ is displayed
APPENDIX 2
(over)