GMP 89915 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 32

GMP 89915 Скачать руководство пользователя страница 21

Page 21

General Machine Products

(KT), LLC

7. Monthly service –

check list

This section includes a list of suggested checks, it is recommended that these checks be car-

ried out on a regular basis, depending on use. Monthly checks are convenient; a few minutes

can be set aside on the same day of each month to complete these simple checks. The next

section of this manual is an empty table, the dates when these checks and all other service

and repair jobs are completed can be entered into the spaces provided in this table. This will

give the user a record of what service has been carried out and when.

1.

Check the tool box, ensure all tools and interchangeable parts are present, clean and

ready for use.

2.

Clean the outside of the machine, take care not to damage the rollers.

3.

Check the top idler roller and ensure it runs freely, and that the speed/distance functions

respond when the wheel is rotated.

4.

Check the condition of the bottom drive roller, replace accordingly.

5.

Clean the exposed threads on the swing bolts that hold the air box and tube clamp assem-
bly together. Add a smear of grease/oil

*

to prevent build up of surface corrosion and to

insure smooth operation of the thumb nuts.

*

Care should be given not to expose the drive roller to any grease or oil.

«
...
19
20
21
22
23
...
»

Содержание 89915

































Отзывы:

Нет отзывов