7
GENERAL PNEUMATIC SAFETY INSTRUCTIONS
The GMP Accelair 2 Blown Fiber Blowing Machine is a pneu-
matic device, using pressurized air to project fiber at high ve-
locities. Please observe the following precautions when oper-
ating the Blowing Machine:
-
•
Compressed air can cause flying debris. This could cause
personal injury. Always wear personal protective equip-
ment.
•
Ensure no personnel are in the manhole at the far end of
the fiber run. Severe personal injury may result.
•
Never open the machine when pressurized.
•
Only authorized, fully trained personnel should operate the
air compressor.
GENERAL ELECTRICAL SAFETY INSTRUCTIONS
The machine has electronic and electrical power and control
circuits. Electric shock hazards exist that could result in severe
personal injury. Observe the following precautions to avoid
electrical hazards:
Do not operate in water. Do not expose the machine to rain.
Do not remove cover of the power supply or the base from the
Accelair 2 machine. There are no user serviceable parts inside.
Refer servicing to qualified service personnel.
