Technology for safety
10
D5000 - D5200 Series
- Intrinsically Safe Isolators and Safety Relays
Transparent Cover
4.
Push the transparent cover to
module for the complete closure.
Operating parameters connector,
LEDs for power, status and fault
indication are visible through the
transparent
cover.
3.
Close the transparent cover
as shown in the picture.
1.
Open the transparent cover using a screwdriver
as shown by arrows in the picture.
2.
Open the transparent cover up to 90 degrees.
For fully programmable modules, a dedicated connector
is accessible and operating parameters are
programmable by the GM Configurator PPC5092 via
SWC5090 Configurator software.
