Technology for safety
6
D5000 - D5200 Series
- Intrinsically Safe Isolators and Safety Relays
Power Bus connector
Power Supply Voltage 24 Vdc can be applied to the module, by connecting directly the voltage to the plug-in Terminal Block of each module,
or via the Power Bus System. The system consists of standard DIN-Rail modules mounted on optional DIN-Rail Power Bus connectors.
The maximum allowed powering capacity is 8 A. It is always possible to remove modules, without disconnecting the bus connector
which remains attached to the DIN-Rail.
Cumulative Fault Alarm indication is provided on the Power Bus connection.
Power Bus system need the accessories shown below, in order to be operative:
Push
To
engage
T35 DIN-Rail
T35 DIN-Rail
JDFT049: D5000 Power Bus Connector (12mm)
JDFT050: D5200 Power Bus Connector (22mm)
Push
To
engage
T35 DIN-Rail
T35 DIN-Rail
Power Supply
and Fault
F Modbus RS485
for diagnostic
only
Power Supply
and Fault
F Modbus RS485
for diagnostic
only
