XRS-330C
33
To cancel the alarm and talk on the channel:
Press the
PTT
and talk in the usual way. The alarm will be canceled, the display
will return to normal and the channel will be open for normal communication.
To clear the alarm completely:
Briefly press
BACK
. The alarm will be canceled and the display will return to the
normal screen.
QUIET MODE
The Quiet mode mutes the receiver to prevent incoming signals from being heard
in the speaker until your SelCall Ident is received. In this way you can monitor
a busy channel for personal calls without being disturbed by unwanted signals.
If your SelCall number is received, the Quiet mode is cancelled and all incoming
signals are heard in the speaker.
Setting up the Quiet mode
To setup the Quiet mode you must first store the individual channels that you
want to stay quiet into the Quiet memory. When the required channels are stored,
simply activate the Quiet mode and all stored channels will remain quiet to all
incoming signals unless your SelCall Ident is received.
Channels not stored in the Quiet memory will remain open to all signals and will
operate normally.
To store individual channels into quiet memory:
1.
Select the required channel.
2.
Press the
MENU
key, and select
FUNCTIONS
.
3.
Select
TOGGLE Q MEM
and press
MENU
to select
ON
or
OFF
.
When Quiet memory is switched ‘ON’ on the selected channel, ‘Q’ will appear at
the top of the display indicating the selected channel is now stored in the Quiet
memory.
When Quiet memory is switched OFF on the selected channel, ‘Q’ will disappear
from the display indicating the channel is no longer stored in the Quiet memory.
