XRS-330C
24
Operating in the Open Scan Mode
If a busy channel is found, scanning will pause to allow the signal to be heard and
will remain there for as long as the channel remains busy. Once the channel has
been clear for 5 seconds, scanning will resume automatically.
If you don’t wish to listen to a busy channel, briefly press
or
while the
radio is paused on that channel. The busy channel will be temporarily removed
from the Scan Group to allow time for the channel to become clear again and
scanning will continue. The skipped channel will be reinstated in the scan
sequence after 30 seconds (see Auto Skip).
If you press the PTT while the radio is scanning, the scan will pause and the radio
will transmit on the working channel.
After the channel has remained clear for 5 seconds scanning will resume.
If your radio pauses on a busy channel and you wish to talk on that channel,
wait for a break in the conversation then press the
PTT
. If the busy channel was
not your working channel, it now becomes your working channel, replacing your
previous working channel. Once your communication has finished and the channel
has been clear for 5 seconds, scanning will resume.
If you need to use your Priority channel at any time, briefly press
PRI
. The scan
will be cancelled and the radio will jump straight to the Priority channel.
PRIORITY SCAN
Priority Scan allows you to scan a number of channels for activity while also
monitoring your Priority channel. The receiver will scan the other channels
only
while there is no signal on the priority channel
. If a signal appears on the
Priority channel it will override any signals being received on any of the other
channels. In addition, if you press the
PTT
at any time, the radio will transmit on
the Priority channel.
Example: Scanning channels 1 - 8 with priority channel 20 in Priority Scan
NOTE
: By default the priority channel will be scanned after every 5th scan
channel. This timing can be adjusted using the XRS Connect App.
