XRS-330C
22
channel. The ‘nuisance’ channel will be completely removed from the Scan Group
for the duration of that scan session. To restore the channel, simply stop and
restart the scan session using the SCAN key (or switch the radio Off then On
again).
NOTE: You can skip as many busy channels from the Scan Group as you wish,
however if you attempt to skip the last remaining channel, all the previously
skipped channels will be restored to the Scan Group.
The length of the skip period can be adjusted through the XRS Connect App.
DUAL WATCH
The Dual Watch mode allows you to monitor two channels at the same time.
While in dual watch mode, the unit will monitor both the working channel and the
priority channel.
You will need to assign one of the programmable buttons to Dual Watch to use
this feature.
To start the dual watch mode:
1.
Use the
Channel Up
or
Channel Down
keys to choose the selected
channel.
2.
Press or hold (depends on how the key is configured for your radio)
the assigned programmable key until the radio beeps.
3.
‘DW’ is displayed and the SCAN icon will animate.
You can change your working channel by pressing the Channel Up and Channel
Down keys.
To exit Dual Watch, press or hold your programmable button (depends on how the
key is configured for your radio), or press the
SCAN
button.
