manualshive.com logo in svg

GME TX6600PRO, Инструкция по эксплуатации

Поделиться
Скачать
GME TX6600PRO Скачать руководство пользователя страница 94

TX6600PRO

 INSTRUCTION MANUAL 

90

Product Type

Warranty Period

UHF CB Portable Radio 
(TX6600PRO)

5 Years

Li-ion Battery Packs

1 Year

3. 

What this warranty does not cover:

3.1   This warranty will not apply in relation to:

(a)   Goods modified or altered in any way. 

(b)    Defects and damage caused by use with non Standard   

 

Communications products. 

(c) 

Repairs performed other than by our authorised representative.

(d)  Defects or damage resulting from misuse, accident, impact or 

neglect.

(e) 

Goods improperly installed or used in a manner contrary to the  
relevant instruction manual; or 

(f)    Goods where the serial number has been removed or made illegal.

4.   Warranty period:

4.1    We provide the following warranty on GME and Kingray products. No 

repair or replacement during the warranty period will renew or extend 
the warranty period past the period from original date of purchase.

Drawing Number: 51902-1

GME Pty Ltd
17 Gibbon Road, Winston Hills NSW 2153, Australia

gme.net.au

Содержание TX6600PRO































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды