![GME TX6600PRO Скачать руководство пользователя страница 42](http://html1.mh-extra.com/html/gme/tx6600pro/tx6600pro_instruction-manual_2236095042.webp)
TX6600PRO
INSTRUCTION MANUAL
38
Selecting Group Scan
Briefly press
MENU
F
then
SCAN
OS/GS
to cycle through the scan groups until
GROUP
is
displayed.
Programming Group Scan channels
ADD or REMOVE your desired channels as described above.
To Start Scanning
Briefly press the
PRI1
or
PRI2
key to select the desired Priority Channel.
Briefly press the
SCAN
OS/GS
key. The
icon will animate and the channel numbers
will change rapidly as the channels are scanned. During this time the display will
show GS-xx where GS indicates Group Scan and xx indicates the selected Priority
Channel.
To Stop Scanning
Briefly press the
SCAN
OS/GS
key. The
icon animation will stop and the radio will
return to your selected Priority Channel.
NOTE:
If there are less than two channels programmed into the Scan memory
when you press the
SCAN
OS/GS
key, the command will be ignored.
Operating in the Group Scan mode
In Group Scan mode, the TX6600PRO scans all the channels programmed into the
Group Scan memory with the selected Priority Channel being scanned every fifth
channel.
If a signal is heard on a scan channel, the scan will pause on that channel and
remain there while the channel is busy and for 5 seconds after it has become clear,
as long as there are no signals on the selected Priority Channel. During this time
the receiver will continue to check the Priority Channel for signals once a second,
resulting in a series of small ‘breaks’ in the reception of the scan channel. Once
the signal has gone, the radio will resume scanning.
If a signal appears on the Priority Channel at any time (even when paused on a
scan channel) the receiver will switch straight to the Priority Channel. If you were
listening to a signal on the scan channel at the time, the radio will beep to alert
you to the change in channel. It will then stay on the Priority Channel for as long
as it is busy. During this time you can transmit on the Priority Channel in the usual
way. Once the activity on the Priority Channel has ceased for 5 seconds, the radio
will resume scanning the other channels.