T X 3 5 5 0 S
I N S T R U C T I O N M A N UA L
PA G E 3 1
Option 1
Option 2
INSTALLATION
GENERAL
Your radio is supplied with a slim, slide on mounting cradle.
As the radio contains a built-in speaker, the cradle can be
screwed or bolted to any convenient location in your vehicle’s
cabin (under or above the dash or on the centre console)
using the mounting slots provided in the cradle.
When planning your installation, avoid locations that are
close to heaters or air conditioners.
INSTALLATION
For maximum sound projection from the internal speaker,
we recommend the cradle be mounted above the radio to
minimise any obstruction of the speaker. Alternatively, if it
is necessary to mount the unit in a less audible location, an
extension speaker can used. The extension speaker plugs into
the extension speaker socket on the radio’s rear panel.
Console Mounting
A flush mounting DIN adapter MBD001 is available as an
optional accessory. The adapter includes mounting brackets
and a specially designed front panel escutcheon to suit most
vehicle installations. See your nearest GME retailer for details.
DIN Adapter MBD001
Installing the Cradle
Screw the mounting cradle to a firm surface then slide the
radio’s main unit into the cradle from the front until it clicks
into place. Finally, connect the power lead, antenna cable and
extension speaker (if required) to the sockets on the radio’s
rear panel.
Mounting the Cradle
Fitting the Radio
Slide radio fully into cradle until it clicks into place.
