PA G E 2 6 I N S T R U C T I O N M A N UA L
T X 3 5 5 0 S
You can also arrange to send SelCalls to every tenth radio by
setting the second digit to A.
e.g.
Sending Ident 145A5 will call radios 14505, 14515, 14525,
14535, 14545 . . -> 14595
Call Acknowledge in Group Mode
There is no call acknowledge when sending group calls.
This is to prevent all the radios in your group from trying to
respond to your SelCall transmission at the same time.
Storing Group Call Idents
Group call Idents can be stored in memory in the same way
as a standard SelCall Ident.
Receiving Group Calls
Receiving a Group call is identical to receiving a normal
SelCall except that the alarm sound is a LOW tone beep
instead of the normal High tone beep. The caller’s Ident or
ALPHA label appears on the display in the usual way.
RECEIVE-ONLY CHANNELS
Your radio supports up to 95 user programmable Receive-
only channels with frequencies in the range 403 – 520 MHz.
Frequencies can be stored in five separate channel banks
labelled A to E, each containing up to 19 channels. These
additional 19 channels are located directly above CB channel
80 (81 – 99).
Each Receive-only channel can also be assigned an Alpha
label to help identify that channel when it is selected.
Selecting Channel Banks
Before programming or recalling channels you should select
the required Channel Bank. The 5 Channel Banks can be
enabled through the menu either as individual banks of 19
channels (RX-A, RX-B, RX-C, RX-D or RX-E) or as a combined
group of 95 channels (RXA-E).
The default Channel Bank is RX-A.
To select any Channel Bank
1. Press and hold
MENU
to enter the menu.
2. Press
MENU
repeatedly until ‘RX-x is displayed where x is
a Channel Bank labelled A, B, C, D or E.
3. Press or to make the desired selection. Select RX-A
through RX-E to enable one of the 5 single Channel Banks
of 19 channels. Select RXA-E to enable all Channel Banks
as a combined group of 95 channels.
When finished briefly press the
PTT
to exit the menu.
Using Channel Banks
When using individual Channel Banks RX-A to RX-E, each
Channel Bank is enabled separately to provide 19 channels
of Receive-only frequencies in each bank. Channels are
numbered from 81 to 99.
Separate Channel Banks
RX-A RX-B
RX-C RX-D
RX-E
R
X
O
N
L
Y
C
H
A
N
N
E
L
S
81
81
81
81
81
82
82
82
82
82
83
83
83
83
83
84
84
84
84
84
85
85
85
85
85
86
86
86
86
86
87
87
87
87
87
88
88
88
88
88
89
89
89
89
89
90
90
90
90
90
91
91
91
91
91
92
92
92
92
92
93
93
93
93
93
94
94
94
94
94
95
95
95
95
95
96
96
96
96
96
97
97
97
97
97
98
98
98
98
98
99
99
99
99
99
