PA G E 3 0 I N S T R U C T I O N M A N UA L
T X 3 5 5 0 S
Scanning Receive-only Channels
Receive-only channels can be programmed into your Open
or Group scan groups in the same way as your normal CB
channels. Receive-only channels cannot be programmed into
your Network scan group.
To add receive-only channel to your scan group, simply select
the required scan group (Open or Group), select the desired
receive-only channel then press and hold the
SCAN
key until
the radio beeps.
will be displayed on that channel. For
more details on scanning, see the section on ‘Scanning’ in
this manual.
CONFIGURATION MENU
The configuration menu controls preset functions in the radio.
To access the menu, press and hold
MENU
until a beep is
heard. Selected menu options are displayed to the left of
the channel display. Briefly press
MENU
to step through the
available menu options. Press or to change the selected
menu option.
After viewing or making changes, briefly press the
PTT
to
exit the menu (or simply wait a few seconds for the menu
function to time-out).
The following settings are available:
Menu Option
UHF CB Channel
RX-Only Channel
RX-Only Frequency /Alpha Label:
NA
Frequency, Alpha Label
CTCSS/DCS:
CTCOF, CTC01-CTC50, DT001-DT104
Network Scan
NS-OF, NS-01 to NS-50, NS001 to NS104
Voice Scrambler:
ENCOF, ENCON
Silent Squelch Tail
SSTOF, SSTON
Beep Tone Level:
BEEP 0 to BEEP 9
Filter Bandwidth:
WBFLT , NBFLT
12.5/25 kHz
Dynamic Volume Control:
DVCOF, DVCON
Display Mode Options:
S-MET, S-LIN, BATT
S-MET, S-LIN, BATT, ALPHA
Busy Lockout:
BLKOF, BLKON
RX Only Channel Banks:
RX-A, RX-B, RX-C, RX-D, RX-E, RXA-E
Speaker (internal)
SPKOF, SPKON
Mic Sensitivity
Mic + Mic + 9
