GME Electrophone TX4200 Series, Инструкция по эксплуатации

Страница: 31 / 33

31
Because the TX4200 contains a wide variety of
functions, it is possible to be confused by the
symbols on the display when learning to operate
the unit. If this happens, simply reset each
function and start again. The TX4200 can’t be
reset just by turning it off because it remembers
all settings when you turn it back on. The
following chart will help identify each symbol
with it’s function and key press. Simply locate
the symbol that is being displayed on your
TX4200 and read across the table to identify
the function that is selected and the associated
access key. Pressing this key will cancel the
function.
If all else fails, press the channel PRI knob. This
resets most functions and takes you straight to
the Priority channel.
TROUBLE SHOOTING
GUIDE
Tx4200
DISPLAY
Q
M
QUIET
OS
GS
TX
CALL TO
CALL FROM
SCAN
PAGE
DUP
BUSY
FUNCTION
The displayed channel is marked
for QUIET operation.
The displayed channel is in Scan
memory.
The QUIET mode is set
Open Scan mode is selected.
Group Scan mode is selected.
The radio is transmitting.
The radio is ready to send the
displayed Selcall Ident.
The radio has just received a
Selcall from a radio with the
displayed Ident.
The radio is Scanning.
The PAGE mode is selected.
The selected channel is set for
DUPLEX operation.
The radio is receiving a signal or
the Squelch is set too far
counter-clockwise.
TO CANCEL
Press and Hold the Squelch knob.
Press and Hold the SCAN button.
Briefly press the Squelch knob.
Briefy press the OS/GS button.
Briefly press the OS/GS button.
Release the PTT switch.
Briefly press the CALL button.
Briefly press the Squelch knob
(if beeping,
briefly press the Squelch knob twice).
Briefly press the SCAN button.
Briefly press the Volume knob.
Briefly press the DUP button.
Wait for the channel to clear or rotate the
Squelch control further clockwise.
Note: Some functions activate when the key is pressed while others activate when it is released.
VEHICLE
VEHICLE
REPEATER/
TRANSLATOR
STATION
SIMPLEX
REPEATER
OPERATION
CHANNEL
31
CHANNEL
1
CHANNEL
1
CHANNEL
31
SIMPLEx/DUPLEx RANGE COMPARISON