GME Electrophone TX4200 Series, Инструкция по эксплуатации

Страница: 22 / 33

• Press and hold the
CALL
button on the
microphone.
• Briefly press the Volume knob.
• Release the
CALL
button.
‘PAGE’
will appear on the display and the
LCD backlighting will dim to conserve power
(in case the TX4200 is to be left in Page
mode for an extended period)
When the Page mode is selected, the receiver
will operate normally and will monitor all signals
on the selected channel. In addition, if the
selected channel is marked with ‘Q’, the QUIET
mode will also be selected. The receiver will
then remain in that state unless it receives your
Selcall Ident (or unless you manually deselect
it).
NOTE:
You cannot transmit while PAGE mode
is selected.
If your Selcall Ident is received, your TX4200
will:
• Quickly acknowledge back to the caller with
two quick beeps.
• Change to the Page channel and transmit
the Page Ident.
• Return to the selected channel and sound
the radio’s Selcall alarm.
‘CALL FROM’
will
be displayed.
To cancel the alarm, briefly press the Volume
knob. The PAGE mode and the alarm will be
cancelled and the caller’s Ident will be
displayed.
• If you wish to return the call:
Briefly press the
CALL
button. The TX4200
will enter the ‘CALL TO’ mode and the
caller’s Ident will automatically be inserted
ready for calling. Press and hold the
CALL
button to make the call.
• If you don’t wish to return the call:
Briefly press the Squelch knob to clear the
caller’s Ident.
Scanning in the PAGE mode
You can scan in the PAGE mode as follows:
1. Select the required scan mode using the
OS/GS button.
2. Check that the required scan channels are
programmed into the selected scan memory,
then press
SCAN
.
(see “Important tips on scanning in the
QUIET mode”).
3. Now select PAGE mode.
As in the single channel mode,
‘PAGE’
will
appear and the backlighting will dim. In
addition SCAN will be displayed and the
channel numbers will change rapidly as they
are being scanned. If any of the channels
are marked with ‘Q’, the QUIET mode will
also be selected.
If your Selcall Ident is received on one of the
scanned channels, your TX4200 will:
• Quickly acknowledge back to the caller with
two quick beeps.
• Change to the Page channel and transmit
the Page Ident.
22
QUIET
Q
SCAN
MEM
DUP OS/GS
2 3 1
SCAN
QUIET
Q
SCAN
MEM
DUP OS/GS
2 3 1