GLW PC 65, Руководство по эксплуатации

Страница: 9 / 39

2 General safety instructions
PC 65 Crimper Operating Instructions – Vers. 1.0 Page 9 of 39
Work on pneumatic systems or equipment must be carried out by pneumatic specialists or trained per-
sonnel under the guidance and supervision of a pneumatic specialist in accordance with current pneu-
matic engineering practices and regulations.
2.8 Proper conduct during emergencies
In case of an emergency, disconnect the equipment from the power supply and shut it off. If the equip-
ment is damaged, inform your superior without delay.
2.9 Responsibilities of the operating company
The operating company is the party operating the machine or equipment for commercial and economic
purposes, or making it available to third parties for use.
This ensues the following obligations for the operating company:

to be familiar and implement occupational health and safety regulations

to carry out a risk assessment

to train and instruct personnel accordingly and on a regular basis about hazards posed

to provide the necessary protective equipment

to prepare instructions for the proper handling of the equipment

to clearly direct and assign responsibilities of the personnel

the assigned personnel must have read the operating instructions before starting up the equip-
ment
In addition, obligations from other policies applicable on site apply accordingly.
2.10 Safety equipment
The device features the following safety equipment:

Protective cover
The device must not be operated without the protective cover.
2.11 Safety markings/labels on the equipment
Marking/label Location
This marking/label is located on the protective cover of the equipment.
WARNING
Risk of injury by being crushed.
Operating the equipment without the protective cover may lead to personal
injuries or damage to property.
Never carry out any work without the protective cover in place.
2.12 Qualification of the personnel
Only trained and instructed personnel is allowed to operate the equipment.