Glutz eAccess, Инструкция по эксплуатации

Страница: 12 / 40

www.glutz.com - 12 -
System overview
2.4 Identifiers
Different identifiers (ID) are required in the «eAccess» system for different purposes. The number of deci -
mal places used in the identifier issued enables you to recognise what kind of identifier it is:
f
8 decimal places: system ID
f
9 decimal places: device ID
f
10 decimal places: media ID
System ID
The system ID allows a system to be clearly identified throughout Glutz. It is used in communication with
Glutz Support and also as part of the procedure for ordering a subsequent system card.
Media ID
The user media and plus and minus cards sold by Glutz are marked with a media ID. The user medium
can be clearly identified via this 10-digit identifier. Knowing the ID allows the media to be deleted from
the device without physical access. User media produced by third-party manufacturers do not have a Glutz
Media ID.
Device ID
The device can be clearly identified via the device ID. Each device has a unique device ID. It is used for the
specific identification of that device.
UID Media
Third-party media can also be used on the eAccess system (e.g. media for drink vending machines, etc.).
Using UID media is less secure when compared to the Glutz system standard. In order to use UID media,
the devices must be activated individually. For security reasons, the device standard for UID media is de-
activated.
Categories
Sample identifier
Programming cards
System cards System ID: 1234.5678
Plus/minus cards 123.456.789.0
Number cards -
Function card for pairing 123.456.789.0
User media
G-Line card
G-Line clip
mAccess key
123.456.789.0