Glutz eAccess Скачать руководство пользователя страница 7

Страница: 7 / 40

- 7 -

1.3

Installation instructions

1.4

Hazard Warnings

General information

1.1

Target users

This document is intended for persons who are:

Installing and commissioning the system (fitters, specialists, door technicians, etc.)

Maintaining and managing the system (owners, administrators, company technicians, etc.)

1.2

Intended use

Your Glutz eAccess system is a locking system and should only be used for the application intended by the

manufacturer: the locking and unlocking of doors/gates. No other use is intended beyond that specified.

The Glutz eAccess system has been designed for specific areas of application (permissible environmental

conditions are described in section 2.2 Technical Data).

NOTE

Battery mode

Glutz identification devices are battery operated. Failure may occur if battery warnings are not observed.
Various configuration settings can be used to optimise battery life.

TIP

Device installation

The devices should be installed by a qualified specialist.
Installation instructions are supplied with the product.

WARNING

Potential immediate danger

Indicates a potential danger that could result in serious injury or death.

Personal risk

Содержание eAccess









































Результаты поиска

Содержание eAccess

Отзывы:

Похожие инструкции для eAccess

Бренды по названию

Популярные бренды

Glutz eAccess, Инструкция по эксплуатации

Результаты поиска

Содержание eAccess

Отзывы:

Похожие инструкции для eAccess

Бренды по названию

Популярные бренды