GLP impression X5, Руководство пользователя

Страница: 7 / 80

German Light Products®
Rev. 20220720-01 7
2. Features
Light source
The impression X5’s light source is a powerful group of 19 x 40 W RGBL LEDs.
Control options
The impression X5 is compatible with DMX 512 and RDM. See the impression X5 Quick
Start and Safety Manual for more details.
The fixture also features GLP
’s FPO (Flexible Protocol Option) Port. This port allows you to
use control options such as LumenRadio CRMX or others on request. Contact your GLP
supplier for details.
Pan and tilt
The impression X5 pans through 540° by default and tilts through 264° with coarse and
fine control channels.
The directions of pan and tilt can be reversed using the control panel or via DMX on
the
Special/Control channel.
Pan range can be changed from 540° (Standard) to 650° (Extended) if needed using
the
Fixture Settings
→
Pan range setting (see’ Pan Range ’ on page 21.
Tilt range can be limited using the Fixture Settings
→
Accessory setting (see’ Accessories
and tilt range ’ on page 21) if external accessories are installed on the head.
When the fixture is powered up and no valid DMX signal is present, the head moves
automatically to its home position (center/center).
You can adjust the speed (and noise level) of pan and tilt movement, as well as the
speed of all other mechanical effects, by selecting from three different performance
options using the
Fixture Settings
→
Performance setting (see ‘ Performance settings ’ on
page 17).
Direction of pan and tilt movement
With the fixture standing on the ground, increasing the pan DMX value moves the yoke
clockwise from its home position. Pan direction can be reversed using the
Fixture
Settings
→
Pan Invert setting (see ‘ Pan Invert ’ on page 20) or via DMX on the
Special/Control channel.
With the fixture standing on the ground, increasing the tilt DMX value moves the head
towards the front from its home position. Tilt direction can be reversed using the
Fixture
Settings
→
Tilt Invert setting ( see ‘ Tilt Invert ’ on page 20) or via DMX on the
Special/Control channel.
Pan and tilt position feedback and self-correction
The fixture has a pan/tilt position feedback and self-correction system that brings the
head back to its correct position if it was unintentionally moved. When correcting pan
and/or tilt, the fixture at first tries twice to move to the correct position. If it cannot
move to this position, it waits for a short period and then tries again.