14
impresssion X5 User Manual
The fixture’s different DMX control modes offer different options for working with the
individual segments or pixels.
●
In nearly all DMX modes, the Main module gives color mixing control of all pixels
together as one segment.
●
Mode 2 (Normal) adds a Sub module as a second layer with pattern effects and
color mixing of all 19 pixels as one segment.
●
Mode 3 (Segment) adds a Sub module as a second layer with pattern effects and
color mixing of the segments: the inner, middle and outer rings.
●
Mode 4 (Multipixel Advanced) adds a Sub module as a second layer with pattern
effects and RGB color mixing of each individual pixel.
●
Mode 5 is a pure pixel mapping mode which is reduced to the main overall control
options plus RGB color mixing of each individual pixel.
Pattern Control
The impression X5 offers a wide range of static and dynamic pre-programmed FX
patterns on the Sub modules. The Sub module color control channels define the color
of the pattern effects.
The Sub module Color Mix Mode is always RGB.
A static pattern is a fixed pattern with only one pattern step. This allows you a very
quick selection of a non-dynamic effect. It has active and inactive pixels. Each active
pixel shows the selected pattern color while each inactive pixel is fully transparent.
A dynamic pattern is a sequence of multiple pattern steps and has active and inactive
pixels. Each active pixel shows the selected pattern color while each inactive pixel is
fully transparent. You can set pattern steps to automatically change continuously
(Pattern Speed) or you can directly select pattern steps (Pattern Index).
Note
The Mix Priority channel lets you decide how the output of the Main module and the
Sub module (pattern or pixel mapping) should be merged.
Pattern selection
The pattern selection channel offers a choice of 59 static patterns, 50 dynamic
patterns and some special patterns. The dynamic patterns offer multiple pattern steps
for individual step selection or continuous pattern step chasers.
Pattern 0 (DMX 000) is the idle pattern and just sets all pixels to active.
The Random Pixel FX pattern at the end of the Pattern Select channel randomly selects
pixels to create an attractive sparkle effect.
Pattern speed/index
As a dynamic pattern is a sequence of multiple pattern steps, you can select:
●
an automatic clockwise or counterclockwise continuous run-through of the pattern
steps with different speeds (dynamic speed control = DMX values 002
…
127), or
Содержание impression X5
Страница 1: ...User Manual impression X5 Document revision 20220720 01 Fixture software version 1 0 0...
Страница 78: ......
Страница 79: ......
Страница 80: ......