GLP Fusion MBL40, Руководство пользователя

Страница: 9 / 37

German Light Products® Safety
Fusion MBL40 User Manual Rev. A 9
the fixture if a primary attachment fails. The secondary attachment must be approved
by an official body such as TÜV as a safety attachment for the weight that it secures, it
must comply with EN 60598-2-17 Section 17.6.6, and it must be able to support a static
suspended load that is ten times the weight that it secures.
●
If the fixture is installed in a location where it may be exposed to forces such as wind
pressure, vibration or movement, make sure that the installation can withstand these
forces. Monitor weather forecasts constantly. Take down the installation immediately if
there is any risk of weather conditions that could destabilize the installation.
●
Check that all covers and items of rigging hardware are secure before using the fixture.
Do not operate the fixture with missing or damaged covers, shields or any optical
component.
●
Restrict access below the work area and work from a stable platform whenever
installing, servicing or moving the fixture.
●
If the fixture becomes damaged, stop using it immediately and disconnect it from
power. Do not attempt to use a fixture that is obviously damaged.
●
Do not modify the fixture in any way not described in its user documentation.
●
Install genuine GLP parts only.