GLP Fusion MBL40, Руководство пользователя

Страница: 15 / 37

German Light Products® Installation
Fusion MBL40 User Manual Rev. A 15
4. Installation
Warning! Read ‘Safety’ starting on page 5 for important safety information that
you must understand before you install or operate the fixture. Install MBL40
fixtures only as described in this chapter, or you may create an installation that is
unsafe.
Install the fixture at least 0.2 m / 8 in. away from combustible materials (wood,
textiles, paper, etc.), 0.2 m / 8 in. away from any surface that will be illuminated,
and a safe distance away from any flammable materials (volatile spirits, etc.).
It is the installer’s responsibility to provide a stable, secure supporting structure
that is suitable for the environment and application and that meets all
applicable codes and legal requirements. Note the requirement to secure
lighting fixtures with safety cables in temporary installations.
Permitted mounting options
An MBL40 fixture may be installed in one of the following ways:
Fastened to a surface at any angle by screwing through the mounting bracket.
Fastened to a rigging truss or similar structure at any angle by means of a truss coupler or
other clamp fixed to the Omega bracket accessory which attaches to the two half-turn
couplers on the mounting bracket.
Securing fixtures with a safety cable
In temporary installations, if a fixture can cause injury or damage if it falls you must secure it
with a secondary attachment such as a safety cable that will hold it if the primary means of
attachment fails. The safety cable must be approved for the weight that it secures. In
multiple installations, each fixture must have its own safety cable.
To secure an MBL40 fixture with a safety cable:
Figure 2. Safety cable attachment point