Gloria Silentio L07, Руководство пользователя

Страница: 12 / 32

GB
12
5.1 Location
Only use the machine outdoors
(i. e. not close to a wall or
another rigid object) and on
a firm level surface.
Do not use the machine on
a plastered surface which has
been strewn with gravel, on
which the discharged material
can cause injuries.
Do not feed any more material
to be cut into the Shredder once
the cutting tool has stopped.
5.2 Connecting the Shredder
to the Mains
A
Important Information!
Only use permitted extension
cables. Ask your electrician.
The connection sockets for exten-
sion cables must be made of
rubber or be encased in rubber
according to DIN V DE 0620.
Never trail the cable over or
underneath the feeding funnel.
Danger of accidents and damage!
When laying the mains cable
make sure that it does not trail
through open doors or windows.
Danger of squashing the cable.
To prevent damaging the
cable, pull the plug to remove
it from the socket. Never pull
the cable.
To connect the Shredder to the
mains, plug the coupling of
the extension cable into the
socket (10) of the Shredder and
the plug into the mains socket.
5.3 Commissioning the Shredder
(Fig. D / E)
A
Important! Pay attention to
the information regarding
proper use and the notes on
safety before you start using the
Shredder.
The Shredder must be assembled
correctly before the motor is
turned on. The feeding funnel
must not contain material to be
cut.
Keep your face and body away
from the feeding funnel.
Keep your hands, feet and other
parts of your body as well as
clothes away from the feeding
area and ejection shaft.
5. Putting into Operation
.
2 wheels
.
Plastic bag with connection
parts and fork wrench
(10/13 mm)
.
Operating instructions
4.2 Operating Parts (Fig. A)
1 Wheels
2 Trolley
3 Shredder
4 Axle
5 Screws (4.2 x 19 mm)
with stops
6 Feeding funnel
7 Screws
8 Holes
9 Hexagon nuts / washers
10 Shredder socket
11 Up/down switch
12 Main switch
13 Adjusting screw
14 Counter nut
15 Cutting plate
16 Motor protection switch
17 Cutting cylinder
4.3 Assembling the Trolley (Fig. B)
Fit the two wheels (1) supplied to
the trolley (2) as follows:
1. Push the wheel (1) onto the
axle (4) of the trolley.
Note:
Mount the wheel cor-
rectly according to fig. B.
2. Push the stop onto the screw (5)
and insert the complete assem-
bly into the hole of the axle in
the trolley and screw tight.
3. Fit the second wheel as
described above.
The Shredder can now be
mounted on the trolley.
4.4 Mounting the Shredder on
the Trolley (Fig. C)
Mount the Shredder (3) on the
trolley (2) as follows :
1. Place the Shredder (3) on the
trolley (2) as shown in dia-
gram C and insert the two
screws (7) in the holes (8).
Note:
Ensure that the Shred-
der is positioned correctly on
the trolley and is not tilted.
2. Secure both screws (7) to
the trolley from underneath
using the washers and
hexagon nuts provided (9).
Environmental protection,
disposal
(pursuant to RL 2002 / 96 EC)
The packaging material
is made of recyclable
materials. Dispose of
packaging materials in
accordance with regu-
lations. Electrical appliances are
not to be disposed of in the nor-
mal household waste, they must
be professionally disposed of.
Important for Germany:
electrical appliances are to be
disposed of through your local
disposal sites.