GB
22
Before starting
After take off of the packing your shred-
der is ready for use.
The indicated power supply has to be
the same as the one of the electric net-
work. Connect the unit by revolving the
strap at the outlet (240V).
Operation
Check that all parts have been
properly assembled!
No shredding residues must
be present inside the shredder!
Observe the safety recommen-
dations - Wear ear protectors!
After using the shredder for
about 1 hour, check that all
the blades are still properly
fixed. Tighten any loose
screws immediately!
When connecting the shredder
to an extension lead, it must be
ensured that the cable lays loo-
sely on the ground and that no
tension is exerted on the
connecting socket of the garden
shredder.
Note:
In case of unfavourable mains condi-
tions, transient voltage fluctuations that
may affect other units can occur during
the switch on procedure. Such faults are
not expected with mains impedances
< 0.43 Ohm.
To switch on:
Activate green
ON-switch
6
.
To switch off:
Activate red
OFF-switch
7
.
Working Hints
Shorten thick branches to
50-60 cm.
Organic waste of all kinds can be
shredded.
Remove soil and stones from
roots
.
Tough, glutinous materials should
be mixed with dry branches in order
to avoid blockages.
After each use see that the shredder
is empty!
After use for long periods check the
tightness of the blades!
Always unplug the shredder after use!
If the motor blocks, switch off imme-
diately!
ø
max.
5 cm
976 165-02_Innen:976 165-01_Innen 02.11.2010 11:12 Uhr Seite 22