background image

SATURN MARS RHINE

44

www.glomex.it

EN

GLI

S

H

1.

FOREWORD

1.1 DELIVERY LETTER

Welcome: with the installation of this antenna, the
world of satellite television comes on board your
boat.
This manual has been drafted in order to help you
with the correct installation and operation of the
antenna.

1.2 ANTENNA IDENTIFICATION

When calling GLOMEX or an authorized Service
Centre, always provide the 

serial number

 and the

model

 of the antenna, shown on the second page

of the manual, on the packaging, on the backside
of the dish, under the control unit and under the
power supply.

1.3 WARRANTY

GLOMEX guarantees the satellite antennas series
SATURN4 V9104S2U and V9104SKEWS2U,
MARS4 V9804S2U, V9804SKEWS2U and
RHINE R9804S2U, R9804SERS2U against con-
formity defects for a period of 24 (twenty-four)
months from the date of sales.
Warranty is intended as the repair or replacement
of the equipment showing conformity defects when
entering the sales contract, with no charge for the
materials.
In case of conformity defects, the customer is enti-
tled to the replacement of the goods with no
charge.
The warranty is only valid if the product comes with
a valid proof of purchase (receipt or invoice).
The non-conforming product must be sent back to
a Service Centre or authorized retailer, who will for-
ward it to:

GLOMEX S.r.l.

Via Faentina 165/G 

48124, Ravenna (Italy)

along with all the accessories supplied at pur-
chase.

The serial number must neither be erased nor
made illegible, otherwise the warranty will be
voided.

S

WARNING

Conserve the installation and user manual with
care! Losing the serial number makes the warranty
null and void!

The warranty does not apply in case of damage
due to carelessness, use or installation not compli-
ant with the instructions given, tampering, product
or serial number modification, damage due to acci-
dental causes or to the buyer’s negligence.
Moreover, warranty does not apply in case of dam-
age consequent to connections of the equipment to
different voltages than those indicated or to sudden
voltage variations of the network the equipment is
connected to, as well as in case of damage caused
by leakage, fire, inductive/electrostatic discharges
or discharges due to lightning, use of cables differ-
ent to those provided, overvoltages or other phe-
nomena not related to the equipment.
The parts subject to wear consequent to use such
as connection cables, driving belts, connectors,
external parts and plastic supports are covered by
a one-year period warranty.
The following are not covered by warranty: periodic
monitoring, software updates, settings of the prod-
uct, maintenance.
After the expiration of the warranty period, the tech-
nical support activities will be carried out charging
the customer for the replaced parts, the labour
costs and freight charges, according to current
rates.

The equipment will be replaced or repaired
under warranty only and exclusively on Glomex
quality department’s approval.

Should any dispute rise, the place of jurisdiction will
exclusively be Ravenna (Italy).

The warranty is provided by:

GLOMEX S.r.l.

Via Faentina 165/G 

48124 Ravenna (Italy)

Содержание MARS Series









































Отзывы: