Barrett 2081-02-01, Инструкция по установке

Страница: 1 / 4

Contents Overview

Small balun

2 x Kevlar core antenna wire, labelled
with frequency markers

2 x Large winders

2 x 10m Throwing cord

2 x Lead throw weights

10m RG-58 coax
(20m RG-213 P/N 2085-02-01)

Carry bag
(No carry bag P/N 2085-02-01)

Instruction sheet
The Rapid Deployment VHF Multiband Dipole Antenna is a tuned antenna
with frequency labels to indicate lengths for each band of operation. When
tuned to a band, the antenna covers the full 6.4MHz band spread, with VSWR
3:1 or better.
For operation, each side of the antenna is
unwound to the tuned length for the band
required. The antenna wires are placed in
notches in the winding handle, with the label
visible on the antenna side of the winder, and
the cross-wire joiner placed behind the notch
so that the wire will not pull through.
To ensure correct frequency tuning, the
remaining (excess) wire should remain neatly
bundled on the winding handle. A Velcro strip
is provided for this purpose.