Globus Genesy 3000, Руководство пользователя

Страница: 25 / 68

25
REV.01 del 06.12.2017
How to skip a phase
In order to pass to a next phase before the end of the one in progress, press and
hold the RIGHT button for 3 seconds.
To return to the previous phase, press the left (back) button for 3 seconds.
“Last 10” menu
The electrostimulator stores the last 10 executed programs, so that these are
available for rapid and easy execution.
The storage occurs automatically at the end of each program. When the memory is
full, older programs are automatically deleted.
When the device turns on, select "Last 10" and then confirm with OK.
Select the program you wish to execute by pressing the P+ and P- buttons.
(If no programs are stored on memory, the message EMPTY appears).
After confirming, three entries are displayed:
a. - Start
b. - Electrode placement
c. - Del from the list
a. It is possible to execute the selected program by placing the cursor on “Start”
and choosing between two modes (automatic or normal). To activate the
automatic function press OK, while to activate the normal function press the
increase intensity buttons.
The message “AUTO” appears on the display above the indicator phase when the
automatic function is activated.
Automatic function (AUTO STIM) Available only for EMS and TENS
currents
The AUTO STIM function enables the user to execute a program automatically, i.e.
without having to regulate the intensity. Intensity values are automatically set to the
levels used during the last execution of the same program. The AUTO STIM function
can be used only for programs listed among the "Last 10" memory.
Notes:
- To execute a program in AUTO STIM mode, it is necessary to apply the electrodes
of each channel on the same position and muscular group (or body part) chosen
for the previous execution of the same program. In fact, intensity values are specific
to each channel.
- When using AUTO STIM mode, each user must access the electrostimulator with a
personal user code (USER).
It is possible to exit AUTO STIM mode by pressing any increase button.