Globus Genesy 3000, Руководство пользователя

Страница: 24 / 68

24
REV.01 del 06.12.2017
- Add to Treatments (see “Treatments” menu);
- Continue with 2+2 (see 2+2 mode).
To start the program, confirm with Start and in the following screen increase the
channel intensity.
Increase/decrease intensity
To increase/decrease the intensity of the single channel, press the Up and Down
buttons of the correspondent channels.
To increase/decrease the intensity of all channels simultaneously, press
the P+ or P- buttons of the keyboard.
Run Time functions
Once a program has started, it is possible to modify:
- time
- frequency
- amplitude
To modify the parameters of the phase in progress, press the Function button. A new
screen appears and the phase time is highlighted.
Modify the time pressing the P+ and P- buttons of the keyboard.
The new time will be automatically confirmed after 5 seconds or by pressing the FN
button.
Move to the other parameters that you want to modify by pressing the LEFT/RIGHT
buttons and repeat the above mentioned process.
Visualization during a program execution
While a treatment is executing, the display shows the program name (top), the
indicator of the phase number and of the phase in progess, the remaining time of
the phase in progress and the type of the wave used (EMS, TEN, MICROC…) For
programs with intermittent stimulation, the working and the rest phase are
graphically represented together with the time countdown.
How to pause a program
To pause a program, press the OK button. Press OK again to return to the program.
The intensity indicators will start from zero every time you start or stop a treatment.
How to stop a program
If you need to stop a program before its end, turn off the instrument by pressing and
holding the OK button for about 3 seconds.