Globus GENESY 1500, Руководство пользователя

Страница: 40 / 68

40
Rev.05.15
NOTES ON THE USE OF MICROCURRENT PROGRAMS
This paragraph refers to the use of microcurrent programs.
The microcurrent programs differ from normal TENS and EMS programs:
- While conventional electrostimulation (e.g. TENS) uses current in the
milliamperes range, microcurrent electrostimulation uses currents in the
microampere range, which are imperceptible by humans. Microcurrents
programs
do not arouse perceptible stimulation in the patient .
- When running a Microcurrents program, use exclusively the special gray
cables connected to the outlets of channels 1 and 3 . If the cables are not
connected or correspond the wrong type, it will not be possible to start the
program. Check the connections and the cables.
-
The Microcurrents programs have preset intensity levels , therefore it is not
necessary to set them. When a Microcurrent program is activated, the
electrostimulator automatically resets the intensity to the correct level. This value
should not be altered during the execution of the program.
- The Microcurrents programs cannot be run in the "2+2 mode" with multiple
treatments. If trying to select a Microcurrents program in "2+2 mode", the
electrostimulator will emit an error tone.
If, according to your therapist, you wish to modify the treatment protocol altering
the intensity, press and hold the UP and DOWN button for 3 seconds.