Globus GENESY 1500, Руководство пользователя

Страница: 11 / 68

11
Rev.05.15
NOTE: For EMS and TENS currents, the 4 channels with colored cables can be used
indifferently.
NOTE: For microcurrent programs use only channels 1 and 3 with gray cables.
NOTE: For denervated muscles programs (rectangular, triangular, trapezoidal) use
only channles 1 and 3 with colored cables.
NOTE: For interferential programs use only the channels 1 and 3 with colored cables.
NOTE: For ionophoresis programs use only the channel 1 with gray cables.
Electrode application
Remove the electrodes from the original package; all new electrodes have a seal
on the package. Ensure that the device is off. First, connect the two cable plugs to
the electrodes, then disconnect the electrodes from their position and apply them
on the skin. See the pictures included in this manual to place the electrodes
correctly.
After use, place the electrodes in their original position again.
ATTENTION: Do not unplug the electrodes if the unit is working.
Battery: how to charge the batteries
The device is supplied with a set of rechargeable nickel-metal hydrate batteries
(7.2V, 1.8Ah), which have high performance without memory effect.
Recharge the batteries when the battery indicator on the display indicates ¼.
To charge the batteries, turn off the electrostimulator and disconnect the
electrodes, then connect the electrostimulator to the charger provided by plugging
it in the appropriate inlet (see picture above).
Use the charger contained in the package only. Contact the authorized service
center to replace the batteries.